BK PRECISION 2005B CALIBRATION and BK PRECISION 2005B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 2005B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   BK PRECISION 2005B   Description / Specification:   Spec Sheet 
BK PRECISION 2005B 150 MHz RF Signal Generator

The B+K Precision 2005B 150 MHz RF Signal Generator, 100 kHz to 150 MHz on six bands. It has a frequency monitor output for external frequency counter. Specifications. Frequency Range: 100 kHz to 150 MHz (up to 450 MHz on third harmonics); A) 100 kHz-300 kHz, B) 300 kHz-1 MHz, C) 1 MHz-3.2 MHz, D) 3 MHz-10 MHz, E) 10 MHz-35 MHz, F) 32 MHz-150MHz, (96-450 MHz on harmonics). Dial Accuracy: ±3%. RF Output Level: Continuously variable, step attenuator provides approximately 20 dB of attenuation. Maximum Output: Approximately 100 mV rms to 35 MHz, continuously variable in hi or lo step, at least 20 dB range of adjustment. Monitor Output Frequency: 100 kHz to 150 MHz. Monitor Output Level: 50 mV rms min. fixed, unmodulated signal. Amplitude Modulation Internal: Frequency 1 kHz; level continuously variable, modulation signal available at front panel jack; fixed 1 V rms (min) into approx. 10 k-ohm. Amplitude Modulation External: Frequency 50 Hz to 20 kHz. Sensitivity: Approximately 100 mV rms.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 2005B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your BK PRECISION 2005B CALIBRATION and/or BK PRECISION 2005B 150 MHz RF Signal Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: